South Bend Clutch Stage 3 Daily Clutch Complete Clutch System – Billet Flywheel
$1,447.00 – $1,497.00
South Bend Stage 3 Daily Clutch Kit | South Bend 19lb Black Billet Steel Flywheel
SS pressure plate with a high performance organic material on both sides of the clutch disc.
This clutch package is designed for high HP vehicles desiring a start performance and engagement similar to O.E. This kit may have a slightly rougher engagment than stock. The pressure plate is our ‘SS’ series with significant load increase over stage 1 or 2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20%-25%. Discs are assembled with heat-treated wear resistant hubs; drive plates and springs for high load transfer and dependable operation. A Performance Organic friction material with a high metal content increases torque and RPM capability and maintains low operating temperatures reducing wear and glazing. Recommended usages are daily, spirited street and occasional track.
South Bend Clutch Black Billet Steel Flywheel
These are 12 pounds lighter than the stock dual mass flywheel and are far more durable than any aluminum inserted flywheel (no expensive to replace warped steel inserts here)
Weight was been removed from the outside areas of the flywheel which reduces inertia and improves response without losing thickness behind the clutch contact area where it is needed to dissipate heat making this the most durable lightweight flywheel available for the Z or G! 19 Lbs
When going to a single mass flywheel it is possible to have trans gear rattle while under load below 2500RPMs This will not cause harm to the transmission and is completely normal with single mass flywheels. We recommend a “Quiet” type clutch for use with any single mass flywheel to reduce trans rattle at idle.
This Complete Kit Includes
- SouthBend Stage 3 Daily Clutch (optional Quiet type Disk)
- South Bend Clutch 4140 Black Billet Steel 19lb Flywheel
- ZSpeed CMAK CSC Delete Kit
- Insulated Stainless Steel Clutch Hose
- New OEM Clutch Master Cylinder
- Alignment Tool
- Pilot Bushing
|Dimensions||14 × 14 × 14 in|