ZSpeed 350Z 370Z G37 Twin | Triple Disk Race Clutch / Flywheel 800-1200 TQ | Includes ZSpeed | CMAK RS-V3 Clutch Fork Release System

$1,699.00$1,899.00

-

Description

ZSpeed Multi Plate Nissan Infiniti 350Z 370Z G35 G37  Q60 Metallic Race Clutch 800-1100TQ

ZSpeed Twin OR Triple Disk Race Clutch, Flywheel Kit + ZSpeed CMAK RS-V3 CSC Delete

These kits are designed for Drag Racing, High Power Street, Drift, Road Course, HPDE and Rally use where quick, accurate clutch action and high durability is needed.

If you car makes under 800 Rear Wheel Torque Choose

  • Twin Disk 215mm  800RWTQ Total Clutch/Flywheel Weight 30.2lbs

If you car makes over 800 Rear Wheel Torque Choose

  • Triple Disk 215mm 1200RWTQ Total Clutch/Flywheel Weight 32.1lbs

Pedal effort on these kits is about the same as a Stage 2 kit, Slightly firmer than stock and very comfortable.

Our single lightweight rigid center drive hub and 215mm lightweight low MOI sintered ceramic/bronze disks reduces total disk inertia VS having 2-3 disk with drive hubs singularly attached to the disk.

Full floating disk V Drive style kits are meant for quick shifts at high RPMS and will release the disks well at all RPM levels for clean, accurate high rpm shifts.

Due to the full floating/rigid disk design, these clutches rattle with pedal pushed in at idle and under 2500rpm acceleration.

V drive style clutches do not have “straps” holding the pressure plate drive plate to the cover so no chance of  strap failure on hard down or up shifts. The floater plates lock into the cover for optimum durability in the racing environment.

Unlike some race clutches that are completely on-off type, these are able to be modulated to a point for low speed maneuverability, they do have a short engagement window however if you are adamant about slowly releasing the pedal you can move around at low speeds without much trouble.

The ZSpeed Nissan 370Z 350Z Infiniti G35 G37 Q60 Race Clutch and Flywheel set comes with a Custom Reduced Stroke CMAK RS V3 “Clutch movement alteration kit” this completely replaces the internal type OEM plastic CSC and replaces it with an external heavy duty style steel, dual seal slave cylinder to the outside of the trans for easy replacement if ever needed.  

This clutch can be installed and immediately put on the dyno or be raced on,  no break in needed. If you are close the its max TQ rating you may want to give it a little break in first.

Clutch Type = Rigid Multi Plate  

Flywheel = Billet Steel

Fitment

Nissan

  • 350ZHR 2007-2008
  • 370Z 2009+

Infiniti

  • G35S VQ35HR 2007-2008 Sedan 6MT
  • Infiniti G37 2008+
  • Infiniti Q60 2014-2016

 

Kits come complete with

  • Clutch and Flywheel Assy with hardware
  • ZSpeed CMAK RS V3 Clutch Fork Conversion Kit (replaces internal Concentric Slave)
  • ZSpeed Stainless Clutch Hose
  • Throw Out Bearing
  • ZSP High Strength Flywheel Bolts (8) 
  • Pilot Bushing
  • Clutch Alignment tool 

 

ZSP Twin Triple Disk Installation Guide

ZSpeed Torque Ratings

This product does not qualify for any further discounts.

Additional information

Weight 55 lbs
Dimensions 16 × 16 × 8 in
Choose model

370Z G37 G35S Q60, 350Z

Choose Style

Twin Disk, Triple Disk

Reviews

There are no reviews yet.

Be the first to review “ZSpeed 350Z 370Z G37 Twin | Triple Disk Race Clutch / Flywheel 800-1200 TQ | Includes ZSpeed | CMAK RS-V3 Clutch Fork Release System”