ZSpeed CMAK V2-V3 Replacement Throw Out Bearing W/Guide and Tube Assy Choose Version
Clutch release bearing , guide tube and mounting plate for ZSpeed “CMAK” CSC Delete kit
You must use all pieces included as a set.
If you purchased the CMAK by itself and for use with standard height clutch and flywheel kits (most common) you should have the standard height bearing.
If purchased with a ZSpeed or Southbend Clutch/flywheel set you could have either, Please contact us for correct replacement bearing.
If you are unsure please call or email us Sales@Zspeed.com and we can verify which one you need.
Comes with complete throw out bearing, Guide tube and mounting plate and screws.
Measured as shown in picture for Version 2 and 3 bearings.
Standard version bearing Height = 22mm (most common with standard height or stock off the shelf clutch/flywheel kits)
Medium version bearing Height = 25mm, Custom for ZSpeed Clutch & Flywheel Kits
Tall version bearing Height = 26mm, Custom for ZSpeed Clutch & Flywheel Kits
If you bought your kit from us we can tell you which one you need if you are not sure. Sales@Zspeed.com
|Dimensions||3 × 3 × 1 in|
V2 Standard, V2 Tall, V3 Standard, V3 Tall
|Infiniti||G35||2007 - 2008||Sedan|
|Infiniti||G37||2008 - 2013||Coupe|
|Infiniti||G37||2009 - 2013||Sedan|
|Infiniti||Q60||2014 - 2015||Coupe|
|Nissan||350Z||2007 - 2008||VQ35HR|
|Nissan||370Z||2009 - 2020||Nismo|
|Nissan||370Z||2009 - 2020||Non-Nismo|